Print document

Technical Forum

Communication / Networks

Communication between S7300 and WinCC SCADA

Thread Starter: ssaglam   Started: 5/28/2012 9:46 AM   Replies: 2

« Previous thread Next thread »
Page 1 of 1 (3 items)
  5/28/2012, 9:46 AM
ssaglam
Joined 5/28/2012
Last visit: 5/28/2012
Posts: 2
Rating:
Rated: no ratings [0 out of 5 / rated 0 time(s)]. (0) 
Rated: no ratings [0 out of 5 / rated 0 time(s)]. (0) 
Hi ,

I have s7300 PLC (317-2 DP) and CP343-1 Lean card. CP modul on Rack 0 and Slot 4. 
I want to communication between WinCC Scada on TCP/IP (in Siemens Protocol Suite)
i have tryin to communication but i did not. 
Do you know how communication setting and parameters.

Attachment: communication.jpg  (26 Downloads)
Top
  5/28/2012, 9:50 AM
playerslight
Joined 4/30/2008
Last visit: 5/21/2013
Posts: 628
Rating:
Rated: Outstanding [3.94 out of 5 / rated 36 time(s)]. (36) 
Rated: no ratings [0 out of 5 / rated 0 time(s)]. (0) 

Change the slot number to 2 ,it is asking where th ecpu is not the cp card




=== Edited by playerslight @ 5/28/2012 9:50 AM [GMT ] ===


Regards


Steve

Some people are like slinkies
they are really good for nothing
but they still bring a smile to your
face when you push them down the stairs!!!
Top
  5/28/2012, 10:41 AM
ssaglam
Joined 5/28/2012
Last visit: 5/28/2012
Posts: 2
Rating:
Rated: no ratings [0 out of 5 / rated 0 time(s)]. (0) 
Rated: no ratings [0 out of 5 / rated 0 time(s)]. (0) 
thank you. now, it is working.
Top
Thank you for this post from:
S_Moderator
Page 1 of 1 (3 items)
Actions
Copy Link
To conference