LOGO!

OBA7 Compensated heating control

Erstellt von countrygent am 02.07.2012 11:46 (1 Antworten)

  02.07.2012, 11:46

countrygent Beigetreten am: 02.07.2012 Letzter Besuch: 22.07.2012 Beiträge: 2 Bewertung:  (0)

(0)  Hi all, I am wanting to write a program to control a domestic heating boiler. I have an analogue temp sensor indoors and one outdoors, probably both PT100. The setpoint of the system will be set manually. I should like a PI control loop to maintain the setpoint but if the outside temp starts dropping, the boiler will heat more in order to compensate so that the room does not cool too much. The output to the boiler is 0-10v and the heat output of the boiler is proportional to that signal. Does anyone know of any articles or snippets of code that would help with this? Thanks.

Top

  02.07.2012, 13:03

desmul24 Beigetreten am: 19.06.2010 Letzter Besuch: 29.05.2013 Beiträge: 174 Bewertung:  (22)

(0)  Hello, You should search this Forum first. A lot of threads about "Temperature control" and "analog calculation by logo" for example the following links: 1)  Temperature Regulation 2)  Curve Temperature Logo 3)  CO2 calculation - Math equations with LOGO! I guess this links are enough for your application, however if you have a specific  un answerd questions let us know You like it? Rate it ! ለማንኛውም የፋብሪካ አውቶሜሽ ስራ፣ በተለይም፡ ፒ. ኤል.ሲ፣ድራይቭ፣ኮምፒዩተራይዝድ ማሽን ስራ፡በዚህ ይደውሉ 0922 493737

Top